french flag
spanish flag

The KC-363 Video Endoscope is an instrument designed as an economical way to solve hidden problems in installations and increase productivity. (Take, for example, to examine a ventilation tube, an air conditioner, the equipment of the machine, engine, etc.).

The support systems are such as iPad, iPad2, iPhone3GS, iPhone4, iPhone4S, Android, Windows computers and IEEE802.11n WIFI card. Video Endoscope Wifi allows multiple devices to connect simultaneously and, is capable of displaying images in real time. We can also connect you through a router to see real-time images on the Internet. It is equipped with a removable where you can place the Smartphone comfortably in the top of the handle. It consists of a 1 meter long probe and 9 mm in diameter, it has four adjustable LEDs around the head to provide light in dark holes. A probe will be placed in various accessories to make it more flexible and adaptive. The 9mm camera accessories are a magnet, a mirror and a hook.

The Video Endoscope Wifi KC-363 model has a built-in lithium polymer battery and can also be used with a 5V adapter or USB port to charge, so it has an LED indicator. This instrument is compact stable operation, simple and portable use. It is used in sectors as varied as industry, construction, vehicle maintenance and aviation.

video endoscopio wif





Gral. Pack.


Unit Pack.


Technical sheet

Technical information: WIFI VIDEO INSPECTION

1. Body.
2. Detachable holder.
3. Hook.
4. Mirror.
5. Magnet.
6. Protective cap for camera.
7. USB charging cable.
A- Camera protective cap.
B- Camera head.
C- Sensor.
D- Reset button (restores factory settings.) When the user forgets the password, insert a thin rigid element into the hole and press for more than 10 seconds, then the device has been refurbished at the factory.
E- Signal Light Blue WIFI.
F- LED button to reduce the brightness.
G- + Increasing brightness LED button.
H- Green light switch.
I- Key and power off.
J- Charge indicator.
K- Charging connector.
L- Hole commitment.
M- Slide support arm.
N- Fixed support arm.

Product Name:
Recommended Use:
WIFI Rangee:
Camera viewing angle:
Chamber diameter:
Purpose Development:
Vision range:
Probe length:
Light source:
Camera Head Accessories:
Image Sensor:
Type of compression:
FPS (frames per second):
Adjustable Picture Settings:
Wireless network Standard:
Wireless Certified:
Adding video:
Static and dynamic IP:
Web service:
WIFI support platform:
Accessories included:
Specification of the phone holder:
Power supply:
Battery capacity:
Charging time:
Battery life:
Operating temperature:
Operating Humidity:
Storage temperature:

Wifi Video Inspection
More than 25 meters in open spaces
About 60
12.7mm to 305mm
4 ultra bright LEDs
The probe and the camera head are IP67
Magnet, hook, mirror and protective cap
VGA CMOS (300k pixels)
Motion JPEG-N
Brightness, contrast and saturation can be adjusted
WIFI 802.11 b / g / n
IP Addresses Compatibility
WEB support based on configuration browser
IPad / iPad2 / iPhone / Android / Windows
USB charging cable
Ideal for telephones 55 ~ 85mm wide 5V output and input battery 3.7V
3.7V / 1200mAh
3 hours
More than 2 hours
0 ~ 45 °C
5% ~ 95% RH non-condensing
-20 ~ + 60° C, <85% (without battery)
266mm x 44mm x 80mm (the length of the probe is 1m)
375g (without mobile holder)

  • Technical assistance unit must be carried out only by qualified personnel. If performed by unqualified personnel, it could be damaged.
  • When repair is performed, use only identical parts. Use of parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
  • Do not attempt to remove any part of this product unless stated in this manual.
  • Clean properly: do not use acetone to clean the appliance. Use a soap to clean it. Gently wipe the LCD screen with a dry cloth. Remove the battery before cleaning.
  • Stop using the unit if it starts smoking.
  • Remove the battery and ask a qualified person under the following conditions:
    1. If liquid has been spilled or objects have fallen into the product.
    2. If the product does not operate normally according to the instructions.
    3. If the product has been dropped or damaged.
    4. When the product shows a change in performance.